Track Master® III XL Track Saw

Track Master III XL Track Saw


An improved, variable speed drive Bosch motor powers the Track Master® III XL Track Saw, allowing perfectly straight cuts and reducing error. A cooling fan increases life expectancy of all electrical components and reduces condensation. The air filter of the cooling fan prevents dust from entering the drive box. Fixed voltage circuitry prevents the motor from overheating if temporarily stalled. Resistors on the circuit board are siliconed into place.
  • The speed control on the drive motor allows the operator to adjust speed to match material hardness. The improved Track Master® III XL utilizes a new cam design which adjusts rollers more efficiently, eliminating cam seizing due to electrolysis.
  • With the drive motor clutch engaged and motor off, the clutch acts as a brake, preventing the saw from moving on the rail system. This is ideal for transportation. Disengaging the clutch allows for manual operation of the saw. The on/off power switch is triple sealed for safety.
  • The vibration-free Track Master® III XL rail system holds the saw 1/4" off the slab, reducing the risk of damage to the material. A suspended system also permits slab cuts, either vertical or horizontal. The built-in, maintenance-free rollers on which the saw bracket rides are self-lubricating so there is no need for grease or oil. The depth of cut is adjustable with the convenient lever at the back of the saw.
  • Add vacuum cups and track to fit your job requirements, with lengths ranging from 2-12'. The precision aluminum rails are designed with slip-on rail shoes to protect the material surface and rails from scratches. A vacuum gauge mounted to the last vacuum cup is easier to see and eliminates excess hoses.
  • The vacuum advantage is that no clamps are needed. It produces grinding and polishing results with no variance at the outside edge. It minimizes the need for grout and reduces the time-consuming process of aligning grout lines and leveling uneven slabs. Elevated vacuum design prevents water and slurry from entering pump.

TKM-300

Item No.953300471 MotorBosch Power (worm drive) rpm4,400 Voltage115 Amperage (saw and drive system)17* Cycle50/60 PhaseSingle Blade capacity7" Arbor sizeDM-5/8" Depth of cut


0° - 2-1/16"
45° - 1-7/8"
60° - 1-5/16" Saw crated weight

Box 1 - Rails 35 lbs.
Box 2 - Access. - 65 lbs. Dimensions

Box 1 - Rails: 3" x 4" x 7-1/2'
Box 2 - Access. 36" x 12" x 10"


*20 amp breaker required